Sanwa Gemini X Spezifikationen PDF herunterladen (Seite 24)

Page 24

[[PROgRaMMing MEnU

AUX-Point setting range is -100 to 100. The default setting for Point 1 is -100, for Point 2 is -60,

for Point 3 is -20, for Point 4 is 20, for Point 5 is 60, and for Point 6 is 100.

3) Press the +/INC or DEC/- keys to choose the Point value for the currently displayed Point.

4) Repeat steps 2 and 3 to choose the Point value for each of the desired Points.



1) To Activate and use the Point Auxiliary function, move the Auxiliary Switch to the ON position (pushed UP.)

2) Press the Right MENU key (or push the Right Toggle Switch forward) to cycle Forward through the programmed Point

Auxiliary positions and press the Left MENU key (or push the Left Toggle Switch forward) to cycle Backward through the

programmed Point Auxiliary positions. The Auxiliary Channel 3 servo will move the specied Point positions as you cycle

through the different Points.

2) Press the Right or Left MENU keys to scroll to the specic Point you would like to change the

Point value for. The default Point values will be displayed.

AUX-P setting range is 2 to 6. The default setting is 6.



2) Press the +/INC or DEC/- keys to choose the number of Points you would like to program.

You cannot choose fewer than 2 Points.



1) Move the Auxiliary Switch to the ON position (pushed UP). The last dened Point, along with

it's current Point value will be displayed, and AUX will ash in the Programming Window. In

addition, the Power Indicator Light will ash rapidly.



1) The TRM switch can be programmed to control the Point Auxiliary function.

This allows you to cycle through the Point positions easily during use. Press

the TRM switch up to cycle Forward through the programmed Point positions and

press the TRM switch down to cycle Backward through the programmed Point

positions. For more information, see page 40.

The Auxiliary Switch can be left in the OFF position (pulled DOWN), if you

use the TRM switch to control the Point Auxiliary function.

TRM Switch

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 55 56

Keine Kommentare

Sanwa Gemini X Spezifikationen Seite 24